The vaporizer is in a hardwood box with a digital temperature display. The ceramic electrofusion heating element and the hands free whip take care of an ultimate vaporizing experiment. The great design is finished with blue and green LED lights.
1. Turn the switch on and choose the desired optimal temperature, for example 190 degrees Celsius, by pressing UP and DOWN. Allow the vaporizer to warm up for a few minutes. The light will turn green when the temperature is reached. 2. Grind the material you want to vaporize and put it in the glass whip, which you keep in such a way that the warning sticker which says "HOT" is turned almost upside down. Do not put too much at once. A thin layer of 3-6 mm. thick is best. 3. Slide the tip of the heating element into the filling chamber. 4. Begin by taking a few short and fast puffs through the tube. For each consecutive puff, slow down your breath. The slower you inhale, the hotter and stronger the resulting vapour will be. Experiment until you find your ideal breath and temperature range preference on the knob. You will quickly get a feel for this. 5. If the material starts to blacken, turn down the temperature a little or inhale faster. After a few inhalations you will notice your exhaust thinly decreasing, indicating that the material is depleted of its essential oils. 6. Once the material is "spent" and you`ve allowed the filling chamber to cool down sufficiently, carefully turn the set upside down again and disconnect the filling chamber. Use the wooden stir tool to help remove any stuck material. Maintenance The tubing and glass filling chamber can be cleaned by running hot water through them from the mouthpiece down. If build up occurs, soak ONLY the glass mouthpiece in alcohol overnight.
Parts of this vaporizer can get extremely hot, so keep it out of reach of children, pets and combustible materials!